DELIGHT On-grid Wind Solar Hybrid Charge Controller

• Maximum Power Point Tracking (MPPT) controllers:

Many controllers available today are equipped with a function called Maximum Power Point Tracking (MPPT); this feature allows the controller to track the maximum power point of the array throughout the day in order to deliver the maximum available solar energy to the batteries. The actual benefits of MPPT depend on the operating temperature of the array and on the battery state of charge. When an array operates under colder conditions, it will produce a higher voltage. If an array has a high voltage, there is a larger difference between the array and the battery voltage and thus more potential power gain from MPPT.

Our Difference

SATISFACTORY SERVICE
- 15 working days delivery
- 5 years warranty
- on-site installation instruction

ADVANCED LIGHTING TECHNOLOGY
- Design for lighting applications
- Dimming and operating profiles for adaptive lighting
- Superior LED luminaires

CUSTOM SOLUTION FOR YOUR APPLICATION
- Precision- engineered for your application
- Array for solar engines available for your application
- Aesthetic- design and value-built engine options

Production Description

1. The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T19115.1-2003 national standard also with users' technical requirements.

2. Big LCD display. The images tell working state visually. Various data show: real-time wind turbine voltage, current, solar panel voltage, current, DC output voltage, current, total power generation (The main board is with button battery, in case of power failure, history data can be saved for 30 days)

3. Two sets of control systems: PWM constant voltage system and three-phase dump load system.

4. PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM's capacity, the three-phase dump load will automatically start immediately. After 10-20minutes, the three-phase dump load will stop and the wind turbine will re-start to resume power supply to ensure the safe running of the overall wind turbine generation system.

5. When the strong or super-strong wind conditions, the controller can conduct constant voltage output to ensure the inverter safety running.

6. When the condition of disconnected grid-connected inverter, the controller can conduct constant voltage output and wait for inverter resumption.

7. When the grid is cut off, the three-phase dump load of the controller will automatically start to work and the inverter will stop output to grid. When the grid resuming, the controller stops three-phase dump load and the inverter will resume power supply.

8. The inside of the controller is equipped with surge protector. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On another way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.

9. The controller is equipped with emergency stop switch; in case of emergency, press down the emergency stop button in the front panel to cut off all power supply of the controller and the wind turbine will immediately brake (three-phase dump load).

10. The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will brake (three-phase dump load).

* Adopt Modbus Communication protocol. Convenient to carry out the secondary development.

* Adjusting the technical specification via RS485 is available. Convenient to adjust the different wind turbines for professional customers.

* Support WIFI and GPRS. Customers can monitor the real-time working state of the on grid wind power system via PC and mobile and query history working sate. Both Android and OS are compatible in Mobile.

* Can increase the solar panel control system according to customer requirements.

* For the different wind turbine, the controller can be equipped with mechanical yawing, rotate tail control, furled empennage, mechanical brake, hydraulic brake, electromagnetism brake and other brake functions.

Model	DE-ACHN1.5KW	DE-ACHN2KW	DE-ACHN3KW
Wind turbine rated power	1.5KW	2KW	3KW
Wind turbine Max. power	3KW	4KW	6KW
Wind turbine rated voltage	AC220V	AC220V	AC220V
Solar panels power (optional)	300W	600W	900W
Function	Rectifier, control, DC output
Automatic protection function	Over voltage protection, network electric cut off protection, regulated supply output, arrester
Manual function	Manual brake, reset, emergency switch
Display mode	LCD
Display content	Wind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM constant voltage	≥320dc	≥320dc	≥320dc
Wind turbine 3-phase dump load voltage	350±5Vdc	350±5Vdc	350±5Vdc
Wind turbine 3-phase dump load time-lapse	12-20 min	12-20 min	12-20 min
Solar panels fuse	2A	3A	4A
PWM dump load fuse	10A	10A	16A
Fuse of DC output	16A	16A	20A
Work environment temperature	-30-60°C
Relative humidity	<90% No condensation
Noise (1m)	<40dB
Degree of protection	IP20 (Indoor) IP65 (Outdoors)
Cooling method	Forced air cooling
Communication interface (optional)	RS485/USB/GPRS/WIFI/Ethernet
Temperature compensation (optional)	-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
Size of the controller (mm)	510*360*240	510*360*240	510*360*240
Weight of the controller	15Kg	17Kg	17Kg
Size of the dump load (mm)	410*360*120	410*360*120	400*410*250
Weight of the dump load	7Kg	9Kg	13Kg

Package: Export standard carton with foam inside for tough handling and long-distance ocean transport

Production process

Payment & Delivery

Payment terms	T/T	EXW	30% In advance, 70% before delivery
		FOB
		CFR/C&F	30% In advance, 70% against copy of B/L
		CIF
	L/C	Total amount above USD50,000, we accept L/C at sight
	West Union	Total amount less than USD5,000
	PayPal
Delivery time	15-20 working days after receiving down payment for one container

FAQ:
Q1. Can I have a sample order for wind solar hybrid charge controller
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than one container

Q3. Do you have any MOQ limit for Off-grid wind solar charge controller order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: Airline and sea shipping also optional. Shipping time depends on distance.

Q5. How to proceed an order for wind and solar hybrid charge controller?
A: Firstly let us know your requirements or application.
Secondly We provide solution according to local sun weather conditions.
Thirdly customer confirms the samples and formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on wind solar hybrid charge controller product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Thank you for visiting our website, further questions please feel free to contact us. We will do our best to support you all the time.

Contact us if you need more details on On-grid Hybrid Controller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wind Solar Power System、Permanent Magnet Alternator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Controller > On-grid Wind Solar Hybrid Controller